Colour negative · 1990s
Kodak Vision 800T
Kodak's fastest cine negative of the late 1990s.
Kodak Vision 800T, the fastest Vision tungsten negative, printed on Vision 2383. Original vs Ashigrain.
At a glance
- Exposure index
- 800
- Tungsten
- Introduced
- 1998
- Discontinued
- Process
- ECN-2
About the film
Kodak Vision 800T is a tungsten-balanced colour camera negative rated EI 800 in tungsten light, coded 5289 in 35 mm and 7289 in 16 mm.
Kodak's chronology lists the 35 mm film under 1998, and the Timeline of Historical Film Colors, independent of Kodak, also starts it in 1998. Kodak lists the 16 mm 7289 a year later, under 1999. It belonged to the first Kodak Vision camera-negative family, for which Kodak's chronology lists Vision 320T 5277 and Vision 500T 5279 under 1996. Kodak's sheet of March 1999 presented it as the fastest colour motion-picture negative of its day. Kodak meant it to intercut with its other films while keeping grain and sharpness close to those of slower stocks. It was made by Eastman Kodak Company and has since been discontinued.
Sources for this history
- KODAK VISION 800T Color Negative Film 5289 / 7289 Technical Data (H-1-5289, March 1999), Eastman Kodak Company
- Chronology of Film, Eastman Kodak Company
- Kodak Vision 800T Color Negative Film 5289, Timeline of Historical Film Colors, University of Zurich
The look
Kodak Vision 800T is a tungsten-balanced colour negative rated EI 800, which Kodak presented as its fastest colour motion-picture negative when it appeared in 1998. Its blue layer is the grainiest, and its contrast is steeper than Vision3 500T's. It prints on Kodak 2383 by default.






Best for
- Night exteriors with little added light
- Dim interiors lit by practicals
- Fast footage intercut with slower Vision stocks
Compare camera films
Science & sources


A tungsten-balanced colour negative with an exposure index of 800. Its curves, spectral sensitivity, MTF and granularity are digitised from Kodak's 1999 sheet, and its dyes from Kodak's separate dye sheet for the film. It prints on Kodak 2383 by default.
Response curves and the evidence behind the model
Compare manufacturer data with Ashigrain’s response on the same axes. These curves show how the model is calibrated to its sources; they do not establish a match to photographed film.
Characteristic response
RMS granularity
Density variation (σD). Where the datasheet gives a single grain value, the response away from that point is an approximation.
| Channel | Density | Datasheet-based σD | Model σD |
|---|---|---|---|
| R | 0.3 | 0.009904 | 0.009742 |
| G | 0.3 | 0.016974 | 0.016727 |
| B | 0.3 | 0.043434 | 0.042653 |
| R | 0.6 | 0.008328 | 0.008191 |
| G | 0.6 | 0.011766 | 0.011595 |
| B | 0.6 | 0.037009 | 0.036343 |
| R | 1 | 0.008308 | 0.008172 |
| G | 1 | 0.009828 | 0.009685 |
| B | 1 | 0.028264 | 0.027756 |
| G | 1.5 | 0.012166 | 0.011989 |
| B | 1.5 | 0.021708 | 0.021317 |
Model limits
These images show the film model in use. Spectral response, lighting and viewing conditions include approximations. Halation, bloom, grain size, weave and flicker are not fully measured for each film. The look of real film also depends on development and print timing.
- Custom lighting spectra, camera metering and the spectral reflectance inferred from fixed-white-balance footage are assumptions used by the model, not measurements of this film.
- Colour-print timing and scan balance under arbitrary lighting are modelled. Scanner colour balance has no standard physical unit.
- The source specifies a 3200 K tungsten design light, not its spectrum. The design-light spectrum is an approximation.
- Conversion-filter spectra (80A for daylight films under tungsten, 85 for tungsten films in daylight) come from separate measured filter data, not from this film’s source. Applying those filters to this film remains modelled.
- Individual dye amounts, layer interactions and push/pull behaviour are approximated where the datasheet provides no calibration. Grain size is assumed; published RMS granularity does not specify dye-cloud size.
- The characteristic response beyond log H −3.99 to −0.42 is extrapolated.
- The granularity chart uses a relative exposure axis and does not state its measuring aperture; the aperture is assumed.
- The sheet prints reciprocity corrections at a few exposure times; the correction between them is interpolated.
- Halation strength, radius and layer weights are not quantified by the datasheet. The effect of removing antihalation and the bloom response are also approximations.
- The printer lamp and filter spectra and the Status A grey aim used in this preview are approximated; the source does not publish the required spectral or laboratory aim data.
Reciprocity: modelled from 1/1000 s to 10 s, following the datasheet's corrections for long and short exposures. Exposure time stops at the ends of that range.
Film guide: assumptions and practical choices
Sources
- Exposure index: KODAK VISION 800T Color Negative Film 5289 / 7289 Technical Data, H-1-5289, Revision 3-99, p. 1
- Process: KODAK VISION 800T Color Negative Film 5289 / 7289 Technical Data, H-1-5289, Revision 3-99, p. 1
- Characteristic curves: KODAK VISION 800T Color Negative Film 5289 / 7289 Technical Data, H-1-5289, Revision 3-99, p. 2
- Diffuse RMS granularity: KODAK VISION 800T Color Negative Film 5289 / 7289 Technical Data, H-1-5289, Revision 3-99, p. 2
- Granularity density: KODAK VISION 800T Color Negative Film 5289 / 7289 Technical Data, H-1-5289, Revision 3-99, p. 2